Downpipes that will work with 3" RSR

[birelshifterkart]

Hey there. Just found out my Megan 3" Downpipe won't bolt up to my RSR cat back OR my stock cat back.

Anyone have any experience with the RSR? With a reducer we figured out it would have fit the stock downpipe, so I firmly believe the problem is with the Megan.

Thanks guys!

[mitchel63]

RRE downpipe works....I assume that means an Apex one will work too.

[confusionisbad]

Like Mitch said, Apexi = RSR basically. If you look at them they look exactly the same.

[birelshifterkart]

Like Mitch said, Apexi = RSR basically. If you look at them they look exactly the same.

Word. That will be stuck in my brain now :)

Thanks at ton!

[jmakado]

I run an RRE DP with car delete and a RSR 3". You can usually find used RRE downpipes for pretty cheap and they work fine. The welding is pretty fugly but if someone is under your car inspecting your DP welds then they may have some larger issues. Right Mitch?

[birelshifterkart]

Cool. I'm gonna take my car to Don's monday or tuesday and we'll see if we can, gotta say it, "Fabricate" (watching too much Am.Choppers) the downpipe to fit. Thanks for your help guys!

[mitchel63]

I run an RRE DP with car delete and a RSR 3". You can usually find used RRE downpipes for pretty cheap and they work fine. The welding is pretty fugly but if someone is under your car inspecting your DP welds then they may have some larger issues. Right Mitch?


Hah! Your DP was made by the new guy on his first day.....

[birelshifterkart]

Hah! Your DP was made by the new guy on his first day.....

haha, thats funny :)

Give the new guy a break, come on guys :D

[intaginize]

Hah! Your DP was made by the new guy on his first day.....


NO, My welds looks like shit too, RRE downpipe.

[birelshifterkart]

Well, Don at Carzcustom hooked me up with his own TIG modification to the mid-pipe. Looks like whoever sold me the RSR catback really only sold me the RSR axle back, then gave me some B.S. mild steel midpipe.

It sounds great though.......very deep and low, not ricey at all. Thanks again guys!

[Steezy303]

Well, Don at Carzcustom hooked me up with his own TIG modification to the mid-pipe. Looks like whoever sold me the RSR catback really only sold me the RSR axle back, then gave me some B.S. mild steel midpipe.

It sounds great though.......very deep and low, not ricey at all. Thanks again guys!

werd, your exhust sounded really good when you were leaving the shop. :D

[sd91GST]

yeah it does sound good bro. yeah did you end up going out and running your friend that night? tomarrow night i think that we might get together and meet up around 7 or so a chat and then cruise around and get a few runs in and video tape some runs. that kid jo (stezzy303) got his exhaust done and wants to see if he has more power. let me know if you wanna roll.

[birelshifterkart]

yeah it does sound good bro. yeah did you end up going out and running your friend that night? tomarrow night i think that we might get together and meet up around 7 or so a chat and then cruise around and get a few runs in and video tape some runs. that kid jo (stezzy303) got his exhaust done and wants to see if he has more power. let me know if you wanna roll.

We haven't gone at it yet since we were downtown and there was a lot of snow. That sounds cool tomarrow night, wish i had my boost gauge installed to see what I'm running at. Let me know where ya'll are gonna meet.

I wonder how much Don would charge to make my 5" grapefruit shooter into 2 stock looking tips? Thats the only thing i'd want to change.

[sd91GST]

hey if you have a boost gauge we can install it quick thats no biggie. we all kinda live up north but we will most likley meet at the shell gas station on 96th and federal around 7 or 7:30

[birelshifterkart]

hey if you have a boost gauge we can install it quick thats no biggie. we all kinda live up north but we will most likley meet at the shell gas station on 96th and federal around 7 or 7:30


Cool, yea its a Defi D-gauge...pretty nice, just don't have a bezel for it to fit in yet. That would be great to get it installed.....where could we do it at?

[sd91GST]

anywhere. if you want you could come by my house. i live off 84th and I-25. let me know i think u have my number. i e-mailed it to you