PDA

View Full Version : 2g Tranny Motor Mount replacement



confusionisbad
07-07-2006, 01:39 PM
Yesterday while working on my car I figured I would put in the remaining prothane mount in the car, but I was not able to remove the motor mount. So I gave up, I was about 1/4" short of getting it out. I loosened the timing belt motor mount, Removed the bolt from the front roll stop, and the tranny mount was totally undone but unable to get the additional clearance I needed.

Is there any other way to get this out with the tranny still in the car? The bolt that was giving me a hassle was the one closest to the passenger side, towards the front.

Eddy

Hal
07-07-2006, 01:57 PM
Unbolt the front and rear rollstops from the transmission.