PDA

View Full Version : 1st gear



tball1213
08-27-2006, 03:53 PM
My first gear is very loud but all other gears are fine, what do you guys think that is?

92laserawd
08-27-2006, 06:44 PM
Loud in what way? Is it really whiney? I'm not sure what "part/s" that are making the noise, but I can pretty much assure you that your 1st gear has been beat down like a red headed step child.

DlandryTSI
08-27-2006, 06:56 PM
You could either be low on transmission fluid or the transmission fluid is old. Try changing it out and see what happens.

--Dave

tball1213
08-28-2006, 07:26 AM
1st gear is just really whiney but no other gears are.

Jack(IAT)
08-30-2006, 01:54 AM
It could be excessive gear wear. I had that problem with a GVR4 tranny awhile ago. Replaced the gears and all was good. I noticed wear and fretting on the old gears when I took a close look at them after the swap. It looked like someone ran it with no oil at some time before I got it.

It could also be a failing bearing making the preloads very loose. It is very common for the intermediate shaft bearing to fail on the bell housing side (#/303), which is where 1st gear is, and the intermediate shaft will move around a lot.

Jack

denverdandb
08-30-2006, 08:38 AM
I also had a gear wear problem with my GSX, first eventually stopped working and there were no functional synchros or gear teeth left, it made some dang funky noises for a while befre it stopped working, including, primarily whining.

pucntuation was edited