PDA

View Full Version : Place to go to resurface flywheel?


Chris
06-28-2007, 02:41 PM
Just wondering if there were any places in the SW metro area that are recommended.
hemi-colt
06-28-2007, 02:56 PM
Parker transmission or napa in castle rock...
Hal
06-28-2007, 07:36 PM
Regardless of who you go with, if possible, have them measure the step height in your presence.

Better to check it twice than to find out it's wrong after you get the car back together and then have issues.

Hal
hemi-colt
06-28-2007, 07:58 PM
Thanks hal i forgot to mention that i found out mine was stepped wrong after i had put every thing back together...
Chris
06-29-2007, 11:02 AM
Went to Park Tranny and they didn't want to touch it being it's aftermarket (ACT Streetlight).
Chris
06-29-2007, 11:41 AM
Went to Park Tranny and they didn't want to touch it being it's aftermarket (ACT Streetlight).
Mean to say Parker Transmission...
biglady112
07-08-2007, 11:47 AM
Bringing this back up for the archives.

Wessbecker automotive in Castle Rock can do aftermarket flywheels. They aren't open on the weekends though.

And the NAPA off of Mississippi and Havana near the Havana Machine SHop can do this as well.

Steven
Chris
07-08-2007, 08:51 PM
FYI for anyone needing their chromoly flywheel resurfaced - I found a NAPA on Havana (near Mississippi) that was happy to resurface my flywheel and they had no problem with stepping it correctly. This was after calling a few places that didn't want to touch it, including Parker Transmission and a couple of NAPA stores closer to me.

Hope that helps.