View Full Version : Whats up guys
fungul
04-18-2003, 11:17 PM
I'm new to the board and I just thought I would say hi. If anyone needs help with a project or anything let me know. I love working on projects.
Dean.
DsmRacing
04-19-2003, 12:00 PM
Might need help in a few weeks, towards the end of May or middle of May doing a clutch and flywheel swap on a 2G awd. You down, any other takers?
Food and drinks will be provided :P
A little incentive, I have 2 jet ski's that I will be taking out to the lake quite often this summer, perhaps a dsm picnic is in order :P
fungul
04-19-2003, 05:47 PM
I've never done one but I would be glad to help. Send me an email when you know when exactly you want to do it.
phastalon
04-19-2003, 09:27 PM
i have the same project to do how bout a workday:)
DsmRacing
04-19-2003, 09:43 PM
sounds good, who's house though? I cant support that many cars where I live. Detached 2 car garage.
tekky
04-20-2003, 09:02 AM
I'd help if its on my time off :p (and I still in the States)
Maybe once 1 car is done I could get my tie rods (inner/outer swapped if all goes well with the tranny work on the other cars :D)
phastalon
04-20-2003, 12:38 PM
i could prolly host it whos all interested? i guess we would have to make it on a sat. If we have enough interest we will see about it, so let me know if your interested and what days would be good
tekky
04-20-2003, 01:18 PM
*raises hand for saturday* (yes I finally got Saturdays off!)
DsmRacing
04-20-2003, 04:52 PM
I will have to take leave for Saturday. It will need to be towards the end of May, like 20th after to early June. I have a lot going on at work and finals are in 2-3 weeks, so a lot of studying and testing to do :( After that, anytime should be fine.
phastalon
04-20-2003, 05:11 PM
ahh thats no good ill be in va beach from may 20th till june 3rd and i really need to get it done before then, but i can still help you when the time comes just let me know. also we could still do a workday if anyone else is interested other than karl and me, so lets keep the headcount going
fungul
04-21-2003, 09:09 PM
But I probably couldn't do it on a sat or fri. week days and sun are a little bit better for me..
fungul
05-02-2003, 02:53 AM
Starting a new job so I may have that sat off. I'll keep you guys posted.
DSMlovergirl311
05-02-2003, 03:15 AM
can a girl lend a hand?
..i dont mean tool bitch either .. but if you need some extra help let me know.
tekky
05-02-2003, 03:33 AM
Originally posted by DSMlovergirl311
can a girl lend a hand?
..i dont mean tool bitch either .. but if you need some extra help let me know.
Hrm... I remember you from COSR I believe.... Sarah? (bad with names) didnt own a DSM but had a white car I believe? Emailed back a forth a few times... was probably a year ago... or just under though... hehe I'd say sure....
and since this thread is alive again.... anyone think they can tackle inner and outter tie rods also? I *really* need to get mine replaced.... I'll even help chip in for food/drinks if this lil get together ever happens (I'd offer to host but I lack the tools, room and garage for anymore than *one* person to really come over :()
SnwNRcktRder
05-02-2003, 04:18 AM
Originally posted by tekky
...and since this thread is alive again.... anyone think they can tackle inner and outter tie rods also? I *really* need to get mine replaced.... I'll even help chip in for food/drinks if this lil get together ever happens (I'd offer to host but I lack the tools, room and garage for anymore than *one* person to really come over :()
well, I just replace my tie rod ends, I didn't do my tie rods though...let us know when you think you are going to do this, I might be able to help out :)
tekky
05-02-2003, 04:35 AM
hehe well I got the ends... (outter tie rods) all depends ont he price of the inners I suppose.... cause I'm gonna have to do them all at once, replace my rear tires and get my alignment done all the same day/2 days time really... (alignment will be free though)
SnwNRcktRder
05-02-2003, 04:54 AM
Originally posted by tekky
...and get my alignment done all the same day/2 days time really... (alignment will be free though)
yeah, I need to get an alignment done also, I got it pretty close, but not as close as they'll get it with the lazers :) how're you getting a free alignment? free is good :)
tekky
05-02-2003, 04:59 AM
when I was in GA instead of paying $80 for a 4wheel I spent an extra 40 and got the lifetime alignment from Firestone ;)
I agree free is good :D
SnwNRcktRder
05-02-2003, 05:03 AM
Originally posted by tekky
when I was in GA instead of paying $80 for a 4wheel I spent an extra 40 and got the lifetime alignment from Firestone ;)
I agree free is good :D
nice...lifetime alignment :) I've never heard of that, I'll have to check it out, see if they're still runnin' that deal
DSMlovergirl311
05-05-2003, 06:18 AM
Originally posted by tekky
Hrm... I remember you from COSR I believe.... Sarah? (bad with names) didnt own a DSM but had a white car I believe? Emailed back a forth a few times... was probably a year ago... or just under though... hehe I'd say sure....
and since this thread is alive again.... anyone think they can tackle inner and outter tie rods also? I *really* need to get mine replaced.... I'll even help chip in for food/drinks if this lil get together ever happens (I'd offer to host but I lack the tools, room and garage for anymore than *one* person to really come over :()
yeah im sarah. wow the white car.. that was a LONG time ago. :eek:
tekky
05-05-2003, 07:17 AM
Originally posted by DSMlovergirl311
yeah im sarah. wow the white car.. that was a LONG time ago. :eek:
hwh like i said...... year or so and GRRR overslept now I gotta run to work... M16 training today and no time for breakfast :(
Powered by vBulletin™ Version 4.0.0 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.