Devil Clutch!

[GSXMonster]

SOOOOOOO. Chad and I just got done putting his transmission back in with the new (used) clutch. After some tweaking to one of the dowels in the block the transmission slid on effortlessly.... Anywho, after starting it back up the damn thing wont go into gear, like the clutch wont disengage. I adjusted the rod under the dash to sure up the pedal and get as much extension on the slave cylinder as possible, but still no go. I can watch the slave cyl. fully extend and we have good pedal pressure.... so what giveS?

Oh yeah, dont leave without checking out this link ;P

http://mafia.cheats4us.org/index.php?x=9418

Rob

[DSMlovergirl311]

is it stuck between gears ?

that link was horrible. stole 13 of my dollars :mad: :D

[phastalon]

no as soon as you try to put it in gear it tries to move and wont engage all the way. im going to check linkage today and take off the slave and push on the fork with a crowbar or something and find out if the problem is in the tranny or hydrolics

[phastalon]

ok the cables comin from the firewall to the tranny look ok. also i took off the slave and tried to push the fork with a crowbar but couldnt get a very good bite. the only things i think are left is trying the new (used) disc with my old pressureplate and flywheel but that involves alot of work and will have to wait till i can get a extra set off hands or at least a supervisor:)

[v413nc3]

It's not the clutch, flywheel or PP... they were working just fine... Hopefully it's not your shift forks or something else internal...