need torque specs for cluch and flywheel right away

[b_diddy]

i need to now the torque specs for a 7 boly flywheel, and, the clutch to flywheel. thank you much.
~Brock

[Van]

Flywheel to crank is 100 ft lbs.

Stock spec for pressure plate to flywheel is 15 ft lbs, but with a heavy ACT clutch I run these at 30 ft lbs. No problems.

Use red loc-tite on them all.

[b_diddy]

thanks alot, and i do have red loc-tite :)