Turbo Guide Updated

[hoffman]

New Updates in "turbo sizing guide"

If there are discrepencies let me know so I can fix them.

If you have info to add, post it here so I can add it to the list.

Thanks

[Bloodline]

Just thought I would throw these out there for you.

Here's an odd one from Precision. Its Garrett Based

SC63: Big shaft (.375) P Trim turbine in an .82AR housing, 63mm compressor in a T04E housing. A few honda guys are making over 700whp on this turbo.

Garrett Big Shaft (.375) turbos. T series. Thought I would add these as well due to the larger number of people running 2.3L and 2.4L setups. I will pair the compressors with P trim turbines since they are best suited to the aobve mentioned engines. Even though some of these have a max flow rating identical to others, the specified amount of flow occurs at a different area on the map or Delta Pressure Ratio.

T58 P trim Commonly known as the TS04: 60lbs/min
T61 P Trim: 60lbs/min
T64 P Trim: 63lbs/min Ugly ass map. Very disproportional
T66 P Trim: 68lbs/min

These last two I will list because there are 2 locals running them on 2.3L setups.

T70 P Trim .96AR : 79lbs/min
T72 P Trim .96AR : 80 lbs/min On a BB unit, the car is making full boost just before 6k off the bottle. The car is setup to run a copious amount of nitrous for spool once everything is dialed in . I'll keep ya updated.

jeff