+ Reply to Thread
Results 1 to 9 of 9

Thread: v-band O2 housing?

  1. Join Date
    Feb 2003
    Location
    CO
    Posts
    418
    Downloads
    0
    Uploads
    0

    v-band O2 housing?

    I may be getting a new turbo that has a v-band on the hot side. Does anyone know where I can get an O2 housing with a v-band on the top (hot side) and the normal 2 bolt connector on the bottom? Or maybe a adapter plate for the mitsu bolt pattern to V-band?
    I checked all the usual places on line but didnt really find anything.
    ***Allen***
    PM for info on True HID Retro Fit's for your car
    Cornfed 6 bolt, Holset T3 HX35 Big H1C, 4" FMIC, 1G head, 1G TB, Walbro 255 (rewired), Tial BOV, DSMLink, 1600cc injectors, -6an fuel lines, Aeromotive AFPR, 3” GM MAF & translator, FP2 Cams, 3" exhaust, 6 puck ACT 2600.
    My music page: myspace.com/wazzzelby

  2. Join Date
    Apr 2003
    Location
    Aurora, Colorado
    Posts
    1,799
    Downloads
    0
    Uploads
    0

    DSM - The "Other" Sport Compact

    Taking donations and/or looking for needed parts for Chumpcar challenge.

    Contact me to arrange pickup of any donated parts along the front range for the RMDSM Chump car project.

    DSM Modding, Repair and Towing Along The Front Range

  3. Join Date
    Feb 2003
    Location
    CO
    Posts
    418
    Downloads
    0
    Uploads
    0

    Yeah, I found that right after I posted.. But $250? I may just make my own from a 120 degree bend and flanges. I was trying to avoid this but it looks like I may have to go that route.
    Thanks!
    ***Allen***
    PM for info on True HID Retro Fit's for your car
    Cornfed 6 bolt, Holset T3 HX35 Big H1C, 4" FMIC, 1G head, 1G TB, Walbro 255 (rewired), Tial BOV, DSMLink, 1600cc injectors, -6an fuel lines, Aeromotive AFPR, 3” GM MAF & translator, FP2 Cams, 3" exhaust, 6 puck ACT 2600.
    My music page: myspace.com/wazzzelby

  4. Join Date
    Mar 2002
    Location
    Castle Rock
    Posts
    1,726
    Downloads
    0
    Uploads
    0

    Quote Originally Posted by wazzelby View Post
    Yeah, I found that right after I posted.. But $250? I may just make my own from a 120 degree bend and flanges. I was trying to avoid this but it looks like I may have to go that route.
    Thanks!
    Get the flanges and we'll weld it up for ya
    -Seth

    11.671 @ 125.34 50trim, 100shot, 110 octane
    11.283 @ 126.86 SC6152e, only boost

    The Pictures
    Other forum screen names; awd1990dsm


    FS: 2004 Yamaha R6, $4300

  5. Join Date
    Feb 2003
    Location
    CO
    Posts
    418
    Downloads
    0
    Uploads
    0

    Sounds like a plan! Thanks!
    ***Allen***
    PM for info on True HID Retro Fit's for your car
    Cornfed 6 bolt, Holset T3 HX35 Big H1C, 4" FMIC, 1G head, 1G TB, Walbro 255 (rewired), Tial BOV, DSMLink, 1600cc injectors, -6an fuel lines, Aeromotive AFPR, 3” GM MAF & translator, FP2 Cams, 3" exhaust, 6 puck ACT 2600.
    My music page: myspace.com/wazzzelby

  6. Join Date
    Nov 2004
    Location
    Denver, CO
    Posts
    166
    Downloads
    0
    Uploads
    0

    Make two and I'll buy one. I need one too.
    George

    1989 Original Turbo Mirage v1.6
    1989 Original Turbo Mirage v2.0
    1991 Gvr4 749/2000
    1995 Lexus Sc300 5spd

  7. Join Date
    Sep 2003
    Location
    Colorado Springs, CO
    Posts
    199
    Downloads
    0
    Uploads
    0

    Make that three if you haven't done them yet.
    Time to move to new forms of motorsport!!!

    97 TSi AWD 2.3l FP Red~ fun car ~for sale

    2010 Audi A4 ~ DD

  8. Join Date
    Nov 2004
    Location
    Denver, CO
    Posts
    166
    Downloads
    0
    Uploads
    0

    Keep it two. My 2g is no longer with me.
    George

    1989 Original Turbo Mirage v1.6
    1989 Original Turbo Mirage v2.0
    1991 Gvr4 749/2000
    1995 Lexus Sc300 5spd

  9. Join Date
    Feb 2003
    Location
    CO
    Posts
    418
    Downloads
    0
    Uploads
    0

    I should be ordering my ERL manifold soon so I'll be making one of these in the next month or so.
    ***Allen***
    PM for info on True HID Retro Fit's for your car
    Cornfed 6 bolt, Holset T3 HX35 Big H1C, 4" FMIC, 1G head, 1G TB, Walbro 255 (rewired), Tial BOV, DSMLink, 1600cc injectors, -6an fuel lines, Aeromotive AFPR, 3” GM MAF & translator, FP2 Cams, 3" exhaust, 6 puck ACT 2600.
    My music page: myspace.com/wazzzelby

+ Reply to Thread

Similar Threads

  1. Any body around here that has a wide band?
    By talontsi in forum Tuning
    Replies: 3
    Last Post: 04-04-2006, 03:25 PM
  2. Wide Band o2 Sensor
    By lbaron in forum Tuning
    Replies: 6
    Last Post: 02-21-2006, 08:21 PM
  3. Wide band O2. where/cheap?
    By erik in forum Misc
    Replies: 7
    Last Post: 02-18-2003, 01:03 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts