+ Reply to Thread
Results 1 to 3 of 3

Thread: Possible ECU issue????

  1. Join Date
    Apr 2003
    Location
    Colorado Springs
    Posts
    127
    Downloads
    0
    Uploads
    0

    Possible ECU issue????

    So I picked up motleykru's TSI and tryin to figure out what the issue is..... Idles fine, won't rev very well.... I hooked up a datalogger to it and it's showin around 13 degrees of timing and 9 counts of knock at idle. I thought it was the knock sensor, but when I disconnected it and logged again, still showing 9 counts of knock. It shouldn't be showin any knock if the sensor isn't connected right, so could the ECU be bad?? What's another direction to go with it???

    Thx for any advice......

  2. Join Date
    Apr 2003
    Location
    Colorado Springs
    Posts
    127
    Downloads
    0
    Uploads
    0

    So I switched ECUs and no change, except that now it seems to be throwin a whole lot more error codes.... Looks like almost every sensor is giving an error code. If the timing belt was off a tooth or two, could that be causing it??

  3. Join Date
    Jan 2002
    Location
    Aurora, CO
    Posts
    1,974
    Downloads
    5
    Uploads
    15

    Sounds like you blew some fuses. Might wanna check.

    --Dave

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts